Home Manager Manual

Version 24.05


Table of Contents

Preface
Installing Home Manager
Standalone installation
NixOS module
nix-darwin module
Using Home Manager
Configuration Example
Rollbacks
Keeping your ~ safe from harm
Graphical services
Updating
Nix Flakes
Prerequisites
Standalone setup
NixOS module
nix-darwin module
Writing Home Manager Modules
Option Types
Contributing
Getting started
Guidelines
News
Tests
Third-Party Tools and Extensions
Module Collections
Frequently Asked Questions (FAQ)
Why is there a collision error when switching generation?
Why are the session variables not set?
How to set up a configuration for multiple users/machines?
Why do I get an error message about ca.desrt.dconf or dconf.service?
How do I install packages from Nixpkgs unstable?
How do I change the package used by a module?
A. Home Manager Configuration Options
B. NixOS Configuration Options
C. nix-darwin Configuration Options
D. Release Notes

Preface

This manual will eventually describe how to install, use, and extend Home Manager.

If you encounter problems then please reach out on the IRC channel #home-manager hosted by OFTC. There is also a Matrix room, which is bridged to the IRC channel. If your problem is caused by a bug in Home Manager then it should be reported on the Home Manager issue tracker.

Note

Commands prefixed with $ sudo have to be run as root, either requiring to login as root user or temporarily switching to it using sudo for example.

Installing Home Manager

Home Manager can be used in three primary ways:

  1. Using the standalone home-manager tool. For platforms other than NixOS and Darwin, this is the only available choice. It is also recommended for people on NixOS or Darwin that want to manage their home directory independently of the system as a whole. See Standalone installation for instructions on how to perform this installation.

  2. As a module within a NixOS system configuration. This allows the user profiles to be built together with the system when running nixos-rebuild. See NixOS module for a description of this setup.

  3. As a module within a nix-darwin system configuration. This allows the user profiles to be built together with the system when running darwin-rebuild. See nix-darwin module for a description of this setup.

Note

In this chapter we describe how to install Home Manager in the standard way using channels. If you prefer to use Nix Flakes then please see the instructions in nix flakes.

Standalone installation

  1. Make sure you have a working Nix installation. Specifically, make sure that your user is able to build and install Nix packages. For example, you should be able to successfully run a command like nix-instantiate '<nixpkgs>' -A hello without having to switch to the root user. For a multi-user install of Nix this means that your user must be covered by the allowed-users Nix option. On NixOS you can control this option using the nix.settings.allowed-users system option.

  2. Add the appropriate Home Manager channel. If you are following Nixpkgs master or an unstable channel you can run

    $ nix-channel --add https://github.com/nix-community/home-manager/archive/master.tar.gz home-manager
    $ nix-channel --update
    

    and if you follow a Nixpkgs version 24.05 channel you can run

    $ nix-channel --add https://github.com/nix-community/home-manager/archive/release-24.05.tar.gz home-manager
    $ nix-channel --update
    
  3. Run the Home Manager installation command and create the first Home Manager generation:

    $ nix-shell '<home-manager>' -A install
    

    Once finished, Home Manager should be active and available in your user environment.

  4. If you do not plan on having Home Manager manage your shell configuration then you must source the

    $HOME/.nix-profile/etc/profile.d/hm-session-vars.sh
    

    file in your shell configuration. Alternatively source

    /etc/profiles/per-user/$USER/etc/profile.d/hm-session-vars.sh
    

    when managing home configuration together with system configuration.

    This file can be sourced directly by POSIX.2-like shells such as Bash or Z shell. Fish users can use utilities such as foreign-env or babelfish.

    For example, if you use Bash then add

    . "$HOME/.nix-profile/etc/profile.d/hm-session-vars.sh"
    

    to your ~/.profile file.

If instead of using channels you want to run Home Manager from a Git checkout of the repository then you can use the home-manager.path option to specify the absolute path to the repository.

Once installed you can see Using Home Manager for a more detailed description of Home Manager and how to use it.

NixOS module

Home Manager provides a NixOS module that allows you to prepare user environments directly from the system configuration file, which often is more convenient than using the home-manager tool. It also opens up additional possibilities, for example, to automatically configure user environments in NixOS declarative containers or on systems deployed through NixOps.

To make the NixOS module available for use you must import it into your system configuration. This is most conveniently done by adding a Home Manager channel to the root user. For example, if you are following Nixpkgs master or an unstable channel, you can run

$ sudo nix-channel --add https://github.com/nix-community/home-manager/archive/master.tar.gz home-manager
$ sudo nix-channel --update

and if you follow a Nixpkgs version 24.05 channel, you can run

$ sudo nix-channel --add https://github.com/nix-community/home-manager/archive/release-24.05.tar.gz home-manager
$ sudo nix-channel --update

It is then possible to add

imports = [ <home-manager/nixos> ];

to your system configuration.nix file, which will introduce a new NixOS option called home-manager.users whose type is an attribute set that maps user names to Home Manager configurations.

For example, a NixOS configuration may include the lines

users.users.eve.isNormalUser = true;
home-manager.users.eve = { pkgs, ... }: {
  home.packages = [ pkgs.atool pkgs.httpie ];
  programs.bash.enable = true;

  # The state version is required and should stay at the version you
  # originally installed.
  home.stateVersion = "24.05";
};

and after a sudo nixos-rebuild switch the user eve’s environment should include a basic Bash configuration and the packages atool and httpie.

Note

If nixos-rebuild switch does not result in the environment you expect, you can take a look at the output of the Home Manager activation script output using

$ systemctl status "home-manager-$USER.service"

If you do not plan on having Home Manager manage your shell configuration then you must add either

. "$HOME/.nix-profile/etc/profile.d/hm-session-vars.sh"

or

. "/etc/profiles/per-user/$USER/etc/profile.d/hm-session-vars.sh"

to your shell configuration, depending on whether home-manager.useUserPackages is enabled. This file can be sourced directly by POSIX.2-like shells such as Bash or Z shell. Fish users can use utilities such as foreign-env or babelfish.

Note

By default packages will be installed to $HOME/.nix-profile but they can be installed to /etc/profiles if

home-manager.useUserPackages = true;

is added to the system configuration. This is necessary if, for example, you wish to use nixos-rebuild build-vm. This option may become the default value in the future.

Note

By default, Home Manager uses a private pkgs instance that is configured via the home-manager.users.<name>.nixpkgs options. To instead use the global pkgs that is configured via the system level nixpkgs options, set

home-manager.useGlobalPkgs = true;

This saves an extra Nixpkgs evaluation, adds consistency, and removes the dependency on NIX_PATH, which is otherwise used for importing Nixpkgs.

Note

Home Manager will pass osConfig as a module argument to any modules you create. This contains the system’s NixOS configuration.

{ lib, pkgs, osConfig, ... }:

Once installed you can see Using Home Manager for a more detailed description of Home Manager and how to use it.

nix-darwin module

Home Manager provides a module that allows you to prepare user environments directly from the nix-darwin configuration file, which often is more convenient than using the home-manager tool.

To make the NixOS module available for use you must import it into your system configuration. This is most conveniently done by adding a Home Manager channel. For example, if you are following Nixpkgs master or an unstable channel, you can run

$ nix-channel --add https://github.com/nix-community/home-manager/archive/master.tar.gz home-manager
$ nix-channel --update

and if you follow a Nixpkgs version 24.05 channel, you can run

$ nix-channel --add https://github.com/nix-community/home-manager/archive/release-24.05.tar.gz home-manager
$ nix-channel --update

It is then possible to add

imports = [ <home-manager/nix-darwin> ];

to your nix-darwin configuration.nix file, which will introduce a new NixOS option called home-manager whose type is an attribute set that maps user names to Home Manager configurations.

For example, a nix-darwin configuration may include the lines

users.users.eve = {
  name = "eve";
  home = "/Users/eve";
};
home-manager.users.eve = { pkgs, ... }: {
  home.packages = [ pkgs.atool pkgs.httpie ];
  programs.bash.enable = true;

  # The state version is required and should stay at the version you
  # originally installed.
  home.stateVersion = "24.05";
};

and after a darwin-rebuild switch the user eve’s environment should include a basic Bash configuration and the packages atool and httpie.

If you do not plan on having Home Manager manage your shell configuration then you must add either

. "$HOME/.nix-profile/etc/profile.d/hm-session-vars.sh"

or

. "/etc/profiles/per-user/$USER/etc/profile.d/hm-session-vars.sh"

to your shell configuration, depending on whether home-manager.useUserPackages is enabled. This file can be sourced directly by POSIX.2-like shells such as Bash or Z shell. Fish users can use utilities such as foreign-env or babelfish.

Note

By default user packages will not be ignored in favor of environment.systemPackages, but they will be installed to /etc/profiles/per-user/$USERNAME if

home-manager.useUserPackages = true;

is added to the nix-darwin configuration. This option may become the default value in the future.

Note

By default, Home Manager uses a private pkgs instance that is configured via the home-manager.users.<name>.nixpkgs options. To instead use the global pkgs that is configured via the system level nixpkgs options, set

home-manager.useGlobalPkgs = true;

This saves an extra Nixpkgs evaluation, adds consistency, and removes the dependency on NIX_PATH, which is otherwise used for importing Nixpkgs.

Note

Home Manager will pass osConfig as a module argument to any modules you create. This contains the system’s nix-darwin configuration.

{ lib, pkgs, osConfig, ... }:

Once installed you can see Using Home Manager for a more detailed description of Home Manager and how to use it.

Using Home Manager

Your use of Home Manager is centered around the configuration file, which is typically found at ~/.config/home-manager/home.nix in the standard installation or ~/.config/home-manager/flake.nix in a Nix flake based installation.

Note

The default configuration used to be placed in ~/.config/nixpkgs¸ so you may see references to that elsewhere. The old directory still works but Home Manager will print a warning message when used.

This configuration file can be built and activated.

Building a configuration produces a directory in the Nix store that contains all files and programs that should be available in your home directory and Nix user profile, respectively. The build step also checks that the configuration is valid and it will fail with an error if you, for example, assign a value to an option that does not exist or assign a value of the wrong type. Some modules also have custom assertions that perform more detailed, module specific, checks.

Concretely, if your configuration contains

programs.emacs.enable = "yes";

then building it, for example using home-manager build, will result in an error message saying something like

$ home-manager build
error: A definition for option `programs.emacs.enable' is not of type `boolean'. Definition values:
- In `/home/jdoe/.config/home-manager/home.nix': "yes"
(use '--show-trace' to show detailed location information)

The message indicates that you must provide a Boolean value for this option, that is, either true or false. The documentation of each option will state the expected type, for programs.emacs.enable you will see “Type: boolean”. You there also find information about the default value and a description of the option. You can find the complete option documentation in Home Manager Configuration Options or directly in the terminal by running

man home-configuration.nix

Once a configuration is successfully built, it can be activated. The activation performs the steps necessary to make the files, programs, and services available in your user environment. The home-manager switch command performs a combined build and activation.

Configuration Example

A fresh install of Home Manager will generate a minimal ~/.config/home-manager/home.nix file containing something like

{ config, pkgs, ... }:

{
  # Home Manager needs a bit of information about you and the
  # paths it should manage.
  home.username = "jdoe";
  home.homeDirectory = "/home/jdoe";

  # This value determines the Home Manager release that your
  # configuration is compatible with. This helps avoid breakage
  # when a new Home Manager release introduces backwards
  # incompatible changes.
  #
  # You can update Home Manager without changing this value. See
  # the Home Manager release notes for a list of state version
  # changes in each release.
  home.stateVersion = "24.05";

  # Let Home Manager install and manage itself.
  programs.home-manager.enable = true;
}

You can use this as a base for your further configurations.

Note

If you are not very familiar with the Nix language and NixOS modules then it is encouraged to start with small and simple changes. As you learn you can gradually grow the configuration with confidence.

As an example, let us expand the initial configuration file to also install the htop and fortune packages, install Emacs with a few extra packages available, and enable the user gpg-agent service.

To satisfy the above setup we should elaborate the home.nix file as follows:

{ config, pkgs, ... }:

{
  # Home Manager needs a bit of information about you and the
  # paths it should manage.
  home.username = "jdoe";
  home.homeDirectory = "/home/jdoe";

  # Packages that should be installed to the user profile.
  home.packages = [
    pkgs.htop
    pkgs.fortune
  ];

  # This value determines the Home Manager release that your
  # configuration is compatible with. This helps avoid breakage
  # when a new Home Manager release introduces backwards
  # incompatible changes.
  #
  # You can update Home Manager without changing this value. See
  # the Home Manager release notes for a list of state version
  # changes in each release.
  home.stateVersion = "24.05";

  # Let Home Manager install and manage itself.
  programs.home-manager.enable = true;

  programs.emacs = {
    enable = true;
    extraPackages = epkgs: [
      epkgs.nix-mode
      epkgs.magit
    ];
  };

  services.gpg-agent = {
    enable = true;
    defaultCacheTtl = 1800;
    enableSshSupport = true;
  };
}
  • Nixpkgs packages can be installed to the user profile using home.packages.

  • The option names of a program module typically start with programs.<package name>.

  • Similarly, for a service module, the names start with services.<package name>. Note in some cases a package has both programs and service options – Emacs is such an example.

To activate this configuration you can run

home-manager switch

or if you are not feeling so lucky,

home-manager build

which will create a result link to a directory containing an activation script and the generated home directory files.

Rollbacks

While the home-manager tool does not explicitly support rollbacks at the moment it is relatively easy to perform one manually. The steps to do so are

  1. Run home-manager generations to determine which generation you wish to rollback to:

    $ home-manager generations
    2018-01-04 11:56 : id 765 -> /nix/store/kahm1rxk77mnvd2l8pfvd4jkkffk5ijk-home-manager-generation
    2018-01-03 10:29 : id 764 -> /nix/store/2wsmsliqr5yynqkdyjzb1y57pr5q2lsj-home-manager-generation
    2018-01-01 12:21 : id 763 -> /nix/store/mv960kl9chn2lal5q8lnqdp1ygxngcd1-home-manager-generation
    2017-12-29 21:03 : id 762 -> /nix/store/6c0k1r03fxckql4vgqcn9ccb616ynb94-home-manager-generation
    2017-12-25 18:51 : id 761 -> /nix/store/czc5y6vi1rvnkfv83cs3rn84jarcgsgh-home-manager-generation
    …
    
  2. Copy the Nix store path of the generation you chose, e.g.,

    /nix/store/mv960kl9chn2lal5q8lnqdp1ygxngcd1-home-manager-generation
    

    for generation 763.

  3. Run the activate script inside the copied store path:

    $ /nix/store/mv960kl9chn2lal5q8lnqdp1ygxngcd1-home-manager-generation/activate
    Starting home manager activation
    …
    

Keeping your ~ safe from harm

To configure programs and services Home Manager must write various things to your home directory. To prevent overwriting any existing files when switching to a new generation, Home Manager will attempt to detect collisions between existing files and generated files. If any such collision is detected the activation will terminate before changing anything on your computer.

For example, suppose you have a wonderful, painstakingly created ~/.config/git/config and add

{
  # …

  programs.git = {
    enable = true;
    userName = "Jane Doe";
    userEmail = "jane.doe@example.org";
  };

  # …
}

to your configuration. Attempting to switch to the generation will then result in

$ home-manager switch
…
Activating checkLinkTargets
Existing file '/home/jdoe/.config/git/config' is in the way
Please move the above files and try again

Graphical services

Home Manager includes a number of services intended to run in a graphical session, for example xscreensaver and dunst. Unfortunately, such services will not be started automatically unless you let Home Manager start your X session. That is, you have something like

{
  # …

  services.xserver.enable = true;

  # …
}

in your system configuration and

{
  # …

  xsession.enable = true;
  xsession.windowManager.command = "…";

  # …
}

in your Home Manager configuration.

Updating

If you have installed Home Manager using the Nix channel method then updating Home Manager is done by first updating the channel. You can then switch to the updated Home Manager environment.

$ nix-channel --update
…
unpacking channels...
$ home-manager switch

Nix Flakes

Home Manager is compatible with Nix Flakes. But please be aware that this support is still experimental and may change in backwards incompatible ways.

Just like in the standard installation you can use the Home Manager flake in three ways:

  1. Using the standalone home-manager tool. For platforms other than NixOS and Darwin, this is the only available choice. It is also recommended for people on NixOS or Darwin that want to manage their home directory independently of the system as a whole. See Standalone setup for instructions on how to perform this installation.

  2. As a module within a NixOS system configuration. This allows the user profiles to be built together with the system when running nixos-rebuild. See NixOS module for a description of this setup.

  3. This allows the user profiles to be built together with the system when running darwin-rebuild. See nix-darwin module for a description of this setup.

Prerequisites

  • Install Nix 2.4 or later, or have it in nix-shell.

  • Enable experimental features nix-command and flakes.

    • When using NixOS, add the following to your configuration.nix and rebuild your system.

      nix = {
        package = pkgs.nixFlakes;
        extraOptions = ''
          experimental-features = nix-command flakes
        '';
      };
      
    • If you are not using NixOS, add the following to nix.conf (located at ~/.config/nix/ or /etc/nix/nix.conf).

      experimental-features = nix-command flakes
      

      You may need to restart the Nix daemon with, for example, sudo systemctl restart nix-daemon.service.

    • Alternatively, you can enable flakes on a per-command basis with the following additional flags to nix and home-manager:

      $ nix --extra-experimental-features "nix-command flakes" <sub-commands>
      $ home-manager --extra-experimental-features "nix-command flakes" <sub-commands>
      
  • Prepare your Home Manager configuration (home.nix).

    Unlike the channel-based setup, home.nix will be evaluated when the flake is built, so it must be present before bootstrap of Home Manager from the flake. See Configuration Example for introduction about writing a Home Manager configuration.

Standalone setup

To prepare an initial Home Manager configuration for your logged in user, you can run the Home Manager init command directly from its flake.

For example, if you are using the unstable version of Nixpkgs or NixOS, then to generate and activate a basic configuration run the command

$ nix run home-manager/master -- init --switch

For Nixpkgs or NixOS version 24.05 run

$ nix run home-manager/release-24.05 -- init --switch

This will generate a flake.nix and a home.nix file in ~/.config/home-manager, creating the directory if it does not exist.

If you omit the --switch option then the activation will not happen. This is useful if you want to inspect and edit the configuration before activating it.

$ nix run home-manager/$branch -- init
$ # Edit files in ~/.config/home-manager
$ nix run home-manager/$branch -- init --switch

Where $branch is one of master or release-24.05.

After the initial activation has completed successfully then building and activating your flake-based configuration is as simple as

$ home-manager switch

It is possible to override the default configuration directory, if you want. For example,

$ nix run home-manager/$branch -- init --switch ~/hmconf
$ # And after the initial activation.
$ home-manager switch --flake ~/hmconf

Note

The flake inputs are not automatically updated by Home Manager. You need to use the standard nix flake update command for that.

If you only want to update a single flake input, then the command nix flake lock --update-input <input> can be used.

You can also pass flake-related options such as --recreate-lock-file or --update-input <input> to home-manager when building or switching, and these options will be forwarded to nix build. See the NixOS Wiki page for details.

NixOS module

To use Home Manager as a NixOS module, a bare-minimum flake.nix would be as follows:

{
  description = "NixOS configuration";

  inputs = {
    nixpkgs.url = "github:nixos/nixpkgs/nixos-unstable";
    home-manager.url = "github:nix-community/home-manager";
    home-manager.inputs.nixpkgs.follows = "nixpkgs";
  };

  outputs = inputs@{ nixpkgs, home-manager, ... }: {
    nixosConfigurations = {
      hostname = nixpkgs.lib.nixosSystem {
        system = "x86_64-linux";
        modules = [
          ./configuration.nix
          home-manager.nixosModules.home-manager
          {
            home-manager.useGlobalPkgs = true;
            home-manager.useUserPackages = true;
            home-manager.users.jdoe = import ./home.nix;

            # Optionally, use home-manager.extraSpecialArgs to pass
            # arguments to home.nix
          }
        ];
      };
    };
  };
}

The Home Manager configuration is then part of the NixOS configuration and is automatically rebuilt with the system when using the appropriate command for the system, such as nixos-rebuild switch --flake <flake-uri>.

You can use the above flake.nix as a template in /etc/nixos by

$ nix flake new /etc/nixos -t github:nix-community/home-manager#nixos

nix-darwin module

The flake-based setup of the Home Manager nix-darwin module is similar to that of NixOS. The flake.nix would be:

{
  description = "Darwin configuration";

  inputs = {
    nixpkgs.url = "github:nixos/nixpkgs/nixos-unstable";
    darwin.url = "github:lnl7/nix-darwin";
    darwin.inputs.nixpkgs.follows = "nixpkgs";
    home-manager.url = "github:nix-community/home-manager";
    home-manager.inputs.nixpkgs.follows = "nixpkgs";
  };

  outputs = inputs@{ nixpkgs, home-manager, darwin, ... }: {
    darwinConfigurations = {
      hostname = darwin.lib.darwinSystem {
        system = "x86_64-darwin";
        modules = [
          ./configuration.nix
          home-manager.darwinModules.home-manager
          {
            home-manager.useGlobalPkgs = true;
            home-manager.useUserPackages = true;
            home-manager.users.jdoe = import ./home.nix;

            # Optionally, use home-manager.extraSpecialArgs to pass
            # arguments to home.nix
          }
        ];
      };
    };
  };
}

and it is also rebuilt with the nix-darwin generations. The rebuild command here may be darwin-rebuild switch --flake <flake-uri>.

You can use the above flake.nix as a template in ~/.config/darwin by

$ nix flake new ~/.config/darwin -t github:nix-community/home-manager#nix-darwin

Writing Home Manager Modules

The module system in Home Manager is based entirely on the NixOS module system so we will here only highlight aspects that are specific for Home Manager. For information about the module system as such please refer to the Writing NixOS Modules chapter of the NixOS manual.

Table of Contents

Option Types

Option Types

Overall the basic option types are the same in Home Manager as NixOS. A few Home Manager options, however, make use of custom types that are worth describing in more detail. These are the option types dagOf and gvariant that are used, for example, by programs.ssh.matchBlocks and dconf.settings.

hm.types.dagOf

Options of this type have attribute sets as values where each member is a node in a directed acyclic graph (DAG). This allows the attribute set entries to express dependency relations among themselves. This can, for example, be used to control the order of match blocks in a OpenSSH client configuration or the order of activation script blocks in home.activation.

A number of functions are provided to create DAG nodes. The functions are shown below with examples using an option foo.bar of type hm.types.dagOf types.int.

hm.dag.entryAnywhere (value: T) : DagEntry<T>

Indicates that value can be placed anywhere within the DAG. This is also the default for plain attribute set entries, that is

foo.bar = {
  a = hm.dag.entryAnywhere 0;
}

and

foo.bar = {
  a = 0;
}

are equivalent.

hm.dag.entryAfter (afters: list string) (value: T) : DagEntry<T>

Indicates that value must be placed after each of the attribute names in the given list. For example

foo.bar = {
  a = 0;
  b = hm.dag.entryAfter [ "a" ] 1;
}

would place b after a in the graph.

hm.dag.entryBefore (befores: list string) (value: T) : DagEntry<T>

Indicates that value must be placed before each of the attribute names in the given list. For example

foo.bar = {
  b = hm.dag.entryBefore [ "a" ] 1;
  a = 0;
}

would place b before a in the graph.

hm.dag.entryBetween (befores: list string) (afters: list string) (value: T) : DagEntry<T>

Indicates that value must be placed before the attribute names in the first list and after the attribute names in the second list. For example

foo.bar = {
  a = 0;
  c = hm.dag.entryBetween [ "b" ] [ "a" ] 2;
  b = 1;
}

would place c before b and after a in the graph.

There are also a set of functions that generate a DAG from a list. These are convenient when you just want to have a linear list of DAG entries, without having to manually enter the relationship between each entry. Each of these functions take a tag as argument and the DAG entries will be named ${tag}-${index}.

hm.dag.entriesAnywhere (tag: string) (values: [T]) : Dag<T>

Creates a DAG with the given values with each entry labeled using the given tag. For example

foo.bar = hm.dag.entriesAnywhere "a" [ 0 1 ];

is equivalent to

foo.bar = {
  a-0 = 0;
  a-1 = hm.dag.entryAfter [ "a-0" ] 1;
}
hm.dag.entriesAfter (tag: string) (afters: list string) (values: [T]) : Dag<T>

Creates a DAG with the given values with each entry labeled using the given tag. The list of values are placed are placed after each of the attribute names in afters. For example

foo.bar =
  { b = 0; }
  // hm.dag.entriesAfter "a" [ "b" ] [ 1 2 ];

is equivalent to

foo.bar = {
  b = 0;
  a-0 = hm.dag.entryAfter [ "b" ] 1;
  a-1 = hm.dag.entryAfter [ "a-0" ] 2;
}
hm.dag.entriesBefore (tag: string) (befores: list string) (values: [T]) : Dag<T>

Creates a DAG with the given values with each entry labeled using the given tag. The list of values are placed before each of the attribute names in befores. For example

foo.bar =
  { b = 0; }
  // hm.dag.entriesBefore "a" [ "b" ] [ 1 2 ];

is equivalent to

foo.bar = {
  b = 0;
  a-0 = 1;
  a-1 = hm.dag.entryBetween [ "b" ] [ "a-0" ] 2;
}
hm.dag.entriesBetween (tag: string) (befores: list string) (afters: list string) (values: [T]) : Dag<T>

Creates a DAG with the given values with each entry labeled using the given tag. The list of values are placed before each of the attribute names in befores and after each of the attribute names in afters. For example

foo.bar =
  { b = 0; c = 3; }
  // hm.dag.entriesBetween "a" [ "b" ] [ "c" ] [ 1 2 ];

is equivalent to

foo.bar = {
  b = 0;
  c = 3;
  a-0 = hm.dag.entryAfter [ "c" ] 1;
  a-1 = hm.dag.entryBetween [ "b" ] [ "a-0" ] 2;
}
hm.types.gvariant

This type is useful for options representing GVariant values. The type accepts all primitive GVariant types as well as arrays, tuples, “maybe” types, and dictionaries.

Some Nix values are automatically coerced to matching GVariant value but the GVariant model is richer so you may need to use one of the provided constructor functions. Examples assume an option foo.bar of type hm.types.gvariant.

hm.gvariant.mkBoolean (v: bool)

Takes a Nix value v to a GVariant boolean value (GVariant format string b). Note, Nix booleans are automatically coerced using this function. That is,

foo.bar = hm.gvariant.mkBoolean true;

is equivalent to

foo.bar = true;
hm.gvariant.mkString (v: string)

Takes a Nix value v to a GVariant string value (GVariant format string s). Note, Nix strings are automatically coerced using this function. That is,

foo.bar = hm.gvariant.mkString "a string";

is equivalent to

foo.bar = "a string";
hm.gvariant.mkObjectpath (v: string)

Takes a Nix value v to a GVariant objectpath value (GVariant format string o).

hm.gvariant.mkUchar (v: string)

Takes a Nix value v to a GVariant uchar value (GVariant format string y).

hm.gvariant.mkInt16 (v: int)

Takes a Nix value v to a GVariant int16 value (GVariant format string n).

hm.gvariant.mkUint16 (v: int)

Takes a Nix value v to a GVariant uint16 value (GVariant format string q).

hm.gvariant.mkInt32 (v: int)

Takes a Nix value v to a GVariant int32 value (GVariant format string i). Note, Nix integers are automatically coerced using this function. That is,

foo.bar = hm.gvariant.mkInt32 7;

is equivalent to

foo.bar = 7;
hm.gvariant.mkUint32 (v: int)

Takes a Nix value v to a GVariant uint32 value (GVariant format string u).

hm.gvariant.mkInt64 (v: int)

Takes a Nix value v to a GVariant int64 value (GVariant format string x).

hm.gvariant.mkUint64 (v: int)

Takes a Nix value v to a GVariant uint64 value (GVariant format string t).

hm.gvariant.mkDouble (v: double)

Takes a Nix value v to a GVariant double value (GVariant format string d). Note, Nix floats are automatically coerced using this function. That is,

foo.bar = hm.gvariant.mkDouble 3.14;

is equivalent to

foo.bar = 3.14;
hm.gvariant.mkArray type elements

Builds a GVariant array containing the given list of elements, where each element is a GVariant value of the given type (GVariant format string a${type}). The type value can be constructed using

  • hm.gvariant.type.string (GVariant format string s)

  • hm.gvariant.type.boolean (GVariant format string b)

  • hm.gvariant.type.uchar (GVariant format string y)

  • hm.gvariant.type.int16 (GVariant format string n)

  • hm.gvariant.type.uint16 (GVariant format string q)

  • hm.gvariant.type.int32 (GVariant format string i)

  • hm.gvariant.type.uint32 (GVariant format string u)

  • hm.gvariant.type.int64 (GVariant format string x)

  • hm.gvariant.type.uint64 (GVariant format string t)

  • hm.gvariant.type.double (GVariant format string d)

  • hm.gvariant.type.variant (GVariant format string v)

  • hm.gvariant.type.arrayOf type (GVariant format string a${type})

  • hm.gvariant.type.maybeOf type (GVariant format string m${type})

  • hm.gvariant.type.tupleOf types (GVariant format string (${lib.concatStrings types}))

  • hm.gvariant.type.dictionaryEntryOf [keyType valueType] (GVariant format string {${keyType}${valueType}})

where type and types are themselves a type and list of types, respectively.

hm.gvariant.mkEmptyArray type

An alias of hm.gvariant.mkArray type [].

hm.gvariant.mkNothing type

Builds a GVariant maybe value (GVariant format string m${type}) whose (non-existent) element is of the given type. The type value is constructed as described for the mkArray function above.

hm.gvariant.mkJust element

Builds a GVariant maybe value (GVariant format string m${element.type}) containing the given GVariant element.

hm.gvariant.mkTuple elements

Builds a GVariant tuple containing the given list of elements, where each element is a GVariant value.

hm.gvariant.mkVariant element

Builds a GVariant variant (GVariant format string v) which contains the value of a GVariant element.

hm.gvariant.mkDictionaryEntry [key value]

Builds a GVariant dictionary entry containing the given list of elements (GVariant format string {${key.type}${value.type}}), where each element is a GVariant value.

Contributing

Contributions to Home Manager are very welcome. To make the process as smooth as possible for both you and the Home Manager maintainers we provide some guidelines that we ask you to follow. See Getting started for information on how to set up a suitable development environment and Guidelines for the actual guidelines.

This text is mainly directed at those who would like to make code contributions to Home Manager. If you just want to report a bug then first look among the already open issues, if you find one matching yours then feel free to comment on it to add any additional information you may have. If no matching issue exists then go to the new issue page and write a description of your problem. Include as much information as you can, ideally also include relevant excerpts from your Home Manager configuration.

Table of Contents

Getting started
Guidelines
News
Tests

Getting started

If you have not previously forked Home Manager then you need to do that first. Have a look at GitHub’s Fork a repo for instructions on how to do this.

Once you have a fork of Home Manager you should create a branch starting at the most recent master branch. Give your branch a reasonably descriptive name. Commit your changes to this branch and when you are happy with the result and it fulfills Guidelines then push the branch to GitHub and create a pull request.

Assuming your clone is at $HOME/devel/home-manager then you can make the home-manager command use it by either

  1. overriding the default path by using the -I command line option:

    $ home-manager -I home-manager=$HOME/devel/home-manager
    

    or, if using flakes:

    $ home-manager --override-input home-manager ~/devel/home-manager
    

    or

  2. changing the default path by ensuring your configuration includes

    programs.home-manager.enable = true;
    programs.home-manager.path = "$HOME/devel/home-manager";
    

    and running home-manager switch to activate the change. Afterwards, home-manager build and home-manager switch will use your cloned repository.

The first option is good if you only temporarily want to use your clone.

Guidelines

If your contribution satisfy the following rules then there is a good chance it will be merged without too much trouble. The rules are enforced by the Home Manager maintainers and to a lesser extent the Home Manager CI system.

If you are uncertain how these rules affect the change you would like to make then feel free to start a discussion in the #home-manager IRC channel, ideally before you start developing.

Maintain backward compatibility

Your contribution should not cause another user’s existing configuration to break unless there is a very good reason and the change should be announced to the user through an assertion or similar.

Remember that Home Manager is used in many different environments and you should consider how your change may effect others. For example,

  • Does your change work for people that do not use NixOS? Consider other GNU/Linux distributions and macOS.

  • Does your change work for people whose configuration is built on one system and deployed on another system?

Keep forward compatibility in mind

The master branch of Home Manager tracks the unstable channel of Nixpkgs, which may update package versions at any time. It is therefore important to consider how a package update may affect your code and try to reduce the risk of breakage.

The most effective way to reduce this risk is to follow the advice in Add only valuable options.

Add only valuable options

When creating a new module it is tempting to include every option supported by the software. This is strongly discouraged. Providing many options increases maintenance burden and risk of breakage considerably. This is why only the most important software options should be modeled explicitly. Less important options should be expressible through an extraConfig escape hatch.

A good rule of thumb for the first implementation of a module is to only add explicit options for those settings that absolutely must be set for the software to function correctly. It follows that a module for software that provides sensible default values for all settings would require no explicit options at all.

If the software uses a structured configuration format like a JSON, YAML, INI, TOML, or even a plain list of key/value pairs then consider using a settings option as described in Nix RFC 42.

Add relevant tests

If at all possible, make sure to add new tests and expand existing tests so that your change will keep working in the future. See Tests for more information about the Home Manager test suite.

All contributed code must pass the test suite.

Add relevant documentation

Many code changes require changing the documentation as well. The documentation is written in Nixpkgs-flavoured Markdown. All text is hosted in Home Manager’s Git repository.

The HTML version of the manual containing both the module option descriptions and the documentation of Home Manager can be generated and opened by typing the following in a shell within a clone of the Home Manager Git repository:

$ nix-build -A docs.html
$ xdg-open ./result/share/doc/home-manager/index.html

When you have made changes to a module, it is a good idea to check that the man page version of the module options looks good:

$ nix-build -A docs.manPages
$ man ./result/share/man/man5/home-configuration.nix.5.gz

Add yourself as a module maintainer

Every new module must include a named maintainer using the meta.maintainers attribute. If you are a user of a module that currently lacks a maintainer then please consider adopting it.

If you are present in the nixpkgs maintainer list then you can use that entry. If you are not then you can add yourself to modules/lib/maintainers.nix in the Home Manager project.

As a maintainer you are expected to respond to issues and pull-requests associated with your module.

Maintainers are encouraged to join the IRC or Matrix channel and participate when they have opportunity.

Format your code

Make sure your code is formatted as described in Code Style. To maintain consistency throughout the project you are encouraged to browse through existing code and adopt its style also in new code.

Format your commit messages

Similar to Format your code we encourage a consistent commit message format as described in Commits.

Format your news entries

If your contribution includes a change that should be communicated to users of Home Manager then you can add a news entry. The entry must be formatted as described in News.

When new modules are added a news entry should be included but you do not need to create this entry manually. The merging maintainer will create the entry for you. This is to reduce the risk of merge conflicts.

Use conditional modules and news

Home Manager includes a number of modules that are only usable on some of the supported platforms. The most common example of platform specific modules are those that define systemd user services, which only works on Linux systems.

If you add a module that is platform specific then make sure to include a condition in the loadModule function call. This will make the module accessible only on systems where the condition evaluates to true.

Similarly, if you are adding a news entry then it should be shown only to users that may find it relevant, see News for a description of conditional news.

Mind the license

The Home Manager project is covered by the MIT license and we can only accept contributions that fall under this license, or are licensed in a compatible way. When you contribute self written code and documentation it is assumed that you are doing so under the MIT license.

A potential gotcha with respect to licensing are option descriptions. Often it is convenient to copy from the upstream software documentation. When this is done it is important to verify that the license of the upstream documentation allows redistribution under the terms of the MIT license.

Commits

The commits in your pull request should be reasonably self-contained, that is, each commit should make sense in isolation. In particular, you will be asked to amend any commit that introduces syntax errors or similar problems even if they are fixed in a later commit.

The commit messages should follow the seven rules, except for "Capitalize the subject line". We also ask you to include the affected code component or module in the first line. That is, a commit message should follow the template

{component}: {description}

{long description}

where {component} refers to the code component (or module) your change affects, {description} is a very brief description of your change, and {long description} is an optional clarifying description. As a rare exception, if there is no clear component, or your change affects many components, then the {component} part is optional. See example_title for a commit message that fulfills these requirements.

Example commit

The commit 69f8e47e9e74c8d3d060ca22e18246b7f7d988ef contains the commit message


    starship: allow running in Emacs if vterm is used

    The vterm buffer is backed by libvterm and can handle Starship prompts
    without issues.

which ticks all the boxes necessary to be accepted in Home Manager.

Finally, when adding a new module, say programs/foo.nix, we use the fixed commit format foo: add module. You can, of course, still include a long description if you wish.

Code Style

The code in Home Manager is formatted by the nixfmt tool and the formatting is checked in the pull request tests. Run the format tool inside the project repository before submitting your pull request.

Keep lines at a reasonable width, ideally 80 characters or less. This also applies to string literals.

We prefer lowerCamelCase for variable and attribute names with the accepted exception of variables directly referencing packages in Nixpkgs which use a hyphenated style. For example, the Home Manager option services.gpg-agent.enableSshSupport references the gpg-agent package in Nixpkgs.

News

Home Manager includes a system for presenting news to the user. When making a change you, therefore, have the option to also include an associated news entry. In general, a news entry should only be added for truly noteworthy news. For example, a bug fix or new option does generally not need a news entry.

If you do have a change worthy of a news entry then please add one in news.nix but you should follow some basic guidelines:

  • The entry timestamp should be in ISO-8601 format having "+00:00" as time zone. For example, "2017-09-13T17:10:14+00:00". A suitable timestamp can be produced by the command

    $ date --iso-8601=second --universal
    
  • The entry condition should be as specific as possible. For example, if you are changing or deprecating a specific option then you could restrict the news to those users who actually use this option.

  • Wrap the news message so that it will fit in the typical terminal, that is, at most 80 characters wide. Ideally a bit less.

  • Unlike commit messages, news will be read without any connection to the Home Manager source code. It is therefore important to make the message understandable in isolation and to those who do not have knowledge of the Home Manager internals. To this end it should be written in more descriptive, prose like way.

  • If you refer to an option then write its full attribute path. That is, instead of writing

    The option 'foo' has been deprecated, please use 'bar' instead.
    

    it should read

    The option 'services.myservice.foo' has been deprecated, please
    use 'services.myservice.bar' instead.
    
  • A new module, say foo.nix, should always include a news entry that has a message along the lines of

    A new module is available: 'services.foo'.
    

    If the module is platform specific, e.g., a service module using systemd, then a condition like

    condition = hostPlatform.isLinux;
    

    should be added. If you contribute a module then you don’t need to add this entry, the merger will create an entry for you.

Tests

Home Manager includes a basic test suite and it is highly recommended to include at least one test when adding a module. Tests are typically in the form of "golden tests" where, for example, a generated configuration file is compared to a known correct file.

It is relatively easy to create tests by modeling the existing tests, found in the tests project directory. For a full reference to the functions available in test scripts, you can look at NMT’s bash-lib.

The full Home Manager test suite can be run by executing

$ nix-shell --pure tests -A run.all

in the project root. List all test cases through

$ nix-shell --pure tests -A list

and run an individual test, for example alacritty-empty-settings, through

$ nix-shell --pure tests -A run.alacritty-empty-settings

However, those invocations will impurely source the system’s nixpkgs, and may cause failures. To run against the nixpkgs from the flake.lock, use instead e.g.

$ nix develop --ignore-environment .#all

Third-Party Tools and Extensions

Here is a collection of tools and extensions that relate to Home Manager. Note, these are maintained outside the regular Home Manager flow so quality and support may vary wildly. If you encounter problems then please raise them in the corresponding project, not as issues in the Home Manager tracker.

If you have made something interesting related to Home Manager then you are encouraged to create a PR that expands this chapter.

Table of Contents

Module Collections

Module Collections

Frequently Asked Questions (FAQ)

Why is there a collision error when switching generation?

Home Manager currently installs packages into the user environment, precisely as if the packages were installed through nix-env --install. This means that you will get a collision error if your Home Manager configuration attempts to install a package that you already have installed manually, that is, packages that shows up when you run nix-env --query.

For example, imagine you have the hello package installed in your environment

$ nix-env --query
hello-2.10

and your Home Manager configuration contains

home.packages = [ pkgs.hello ];

Then attempting to switch to this configuration will result in an error similar to

$ home-manager switch
these derivations will be built:
  /nix/store/xg69wsnd1rp8xgs9qfsjal017nf0ldhm-home-manager-path.drv
[…]
Activating installPackages
replacing old ‘home-manager-path’
installing ‘home-manager-path’
building path(s) ‘/nix/store/b5c0asjz9f06l52l9812w6k39ifr49jj-user-environment’
Wide character in die at /nix/store/64jc9gd2rkbgdb4yjx3nrgc91bpjj5ky-buildenv.pl line 79.
collision between ‘/nix/store/fmwa4axzghz11cnln5absh31nbhs9lq1-home-manager-path/bin/hello’ and ‘/nix/store/c2wyl8b9p4afivpcz8jplc9kis8rj36d-hello-2.10/bin/hello’; use ‘nix-env --set-flag priority NUMBER PKGNAME’ to change the priority of one of the conflicting packages
builder for ‘/nix/store/b37x3s7pzxbasfqhaca5dqbf3pjjw0ip-user-environment.drv’ failed with exit code 2
error: build of ‘/nix/store/b37x3s7pzxbasfqhaca5dqbf3pjjw0ip-user-environment.drv’ failed

The solution is typically to uninstall the package from the environment using nix-env --uninstall and reattempt the Home Manager generation switch.

You could also opt to unistall all of the packages from your profile with nix-env --uninstall '*'.

Why are the session variables not set?

Home Manager is only able to set session variables automatically if it manages your Bash, Z shell, or fish shell configuration. To enable such management you use programs.bash.enable, programs.zsh.enable, or programs.fish.enable.

If you don’t want to let Home Manager manage your shell then you will have to manually source the ~/.nix-profile/etc/profile.d/hm-session-vars.sh file in an appropriate way. In Bash and Z shell this can be done by adding

. "$HOME/.nix-profile/etc/profile.d/hm-session-vars.sh"

to your .profile and .zshrc files, respectively. The hm-session-vars.sh file should work in most Bourne-like shells. For fish shell, it is possible to source it using the foreign-env plugin

fenv source "$HOME/.nix-profile/etc/profile.d/hm-session-vars.sh" > /dev/null

How to set up a configuration for multiple users/machines?

A typical way to prepare a repository of configurations for multiple logins and machines is to prepare one "top-level" file for each unique combination.

For example, if you have two machines, called "kronos" and "rhea" on which you want to configure your user "jane" then you could create the files

  • kronos-jane.nix,

  • rhea-jane.nix, and

  • common.nix

in your repository. On the kronos and rhea machines you can then make ~jane/.config/home-manager/home.nix be a symbolic link to the corresponding file in your configuration repository.

The kronos-jane.nix and rhea-jane.nix files follow the format

{ ... }:

{
  imports = [ ./common.nix ];

  # Various options that are specific for this machine/user.
}

while the common.nix file contains configuration shared across the two logins. Of course, instead of just a single common.nix file you can have multiple ones, even one per program or service.

You can get some inspiration from the Post your home-manager home.nix file! Reddit thread.

Why do I get an error message about ca.desrt.dconf or dconf.service?

You are most likely trying to configure something that uses dconf but the DBus session is not aware of the dconf service. The full error you might get is

error: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name ca.desrt.dconf was not provided by any .service files

or

error: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit dconf.service not found.

The solution on NixOS is to add

programs.dconf.enable = true;

to your system configuration.

How do I install packages from Nixpkgs unstable?

If you are using a stable version of Nixpkgs but would like to install some particular packages from Nixpkgs unstable – or some other channel – then you can import the unstable Nixpkgs and refer to its packages within your configuration. Something like

{ pkgs, config, ... }:

let

  pkgsUnstable = import <nixpkgs-unstable> {};

in

{
  home.packages = [
    pkgsUnstable.foo
  ];

  # …
}

should work provided you have a Nix channel called nixpkgs-unstable.

You can add the nixpkgs-unstable channel by running

$ nix-channel --add https://nixos.org/channels/nixpkgs-unstable nixpkgs-unstable
$ nix-channel --update

Note, the package will not be affected by any package overrides, overlays, etc.

How do I change the package used by a module?

By default Home Manager will install the package provided by your chosen nixpkgs channel but occasionally you might end up needing to change this package. This can typically be done in two ways.

  1. If the module provides a package option, such as programs.beets.package, then this is the recommended way to perform the change. For example,

    programs.beets.package = pkgs.beets.override { pluginOverrides = { beatport.enable = false; }; };
    

    See Nix pill 17 for more information on package overrides. Alternatively, if you want to use the beets package from Nixpkgs unstable, then a configuration like

    { pkgs, config, ... }:
    
    let
    
      pkgsUnstable = import <nixpkgs-unstable> {};
    
    in
    
    {
      programs.beets.package = pkgsUnstable.beets;
    
      # …
    }
    

    should work OK.

  2. If no package option is available then you can typically change the relevant package using an overlay.

    For example, if you want to use the programs.skim module but use the skim package from Nixpkgs unstable, then a configuration like

    { pkgs, config, ... }:
    
    let
    
      pkgsUnstable = import <nixpkgs-unstable> {};
    
    in
    
    {
      programs.skim.enable = true;
    
      nixpkgs.overlays = [
        (self: super: {
          skim = pkgsUnstable.skim;
        })
      ];
    
      # …
    }
    

    should work OK.